- 【Smart, High-efficient, Fast Battery Charger】 Ampeak BC0253 car battery charger, with 84% more power and low-voltage detection down to 1-volt, suits drained or idled 12v lead-acid batteries including STD/DEEP CYCLE, AGM, and GEL. Fully-automatic and manual options, pre-set memory function ensure a more convenient and more effective charging.
- 【Optimized HD LCD Display】 Intuitive words, vivid icons, and switchable interfaces help you clearly monitor your battery status, charging data & charging stages, and do troubleshoot in time. Full-wrapped pure copper battery clips with 1.38-inch/35mm openings and firmer cover really matter in your side-posts connection.
- 【Multiple Charging Safety Ensured】 ETL-listed, smart-chip-controlled, safe enough to use without worrying about Spark/Overtime Charging/Overheating/Reverse Polarity/Over-discharge/Current Backflow/Short Circuit/Over Voltage/Over Current. Equipped with an intelligent 8-stage charging program for added charging precision, battery power optimization, and extended battery life.
- 【Superior Jump Start and Winter Mode Charging】 The engine start aid can urgently activate your low-voltage battery and start your vehicle in 100 seconds. The 12v battery charger, adopting 0.2-volt more than its normal charging voltage, boosts your battery activity, then charges more precisely and thoroughly in extremely cold weather. Auto-stop when fully charged, auto-awake and pulse compensate when voltage drops allow a long-time connection.
- 【Pulse Restore and Better Maintain Batteries】 The fully automatic smart battery charger will adopt a 15.8V high voltage to detect and repair your severely-sulfated terminals for smooth battery recognization. With the same high voltage (15.8V), it can also recondition and rehabilitate the lost performance of unused batteries. Pure copper transformer, super-fast heat-dissipation well improve its working performance.
【Discount benefits: add to the shopping cart, and reduce $10 when the order reaches $200】
|Input||120V AC/ 60Hz, 9A|
|Output||12V DC, 2A/10A/25A/Automatic|
|Working Temperature||-10°C ~ 40°C / 14°F ~ 104°F|
Intelligent 8-Stage Charging Program (Controlled By MCU) --- Ampeak BC0253
|Stage 1 - Battery Desulfation||Adopt 15.8V pulse voltage for electrolytic removal of sulfated crystals. Automatically skip when not needed.|
|Stage 2 - Soft Start||A slow and steady buildup of the charging process that limits the power input to protect your battery.|
|Stage 3 - Bulk Charging||The main part of the whole charging process where the battery power will reache about 80% full.|
|Stage 4 - Absorption||Fully charge the battery by slowly reducing the charging rate to allow your battery to absorb more power.|
|Stage 5 - Battery Analysis||Auto-test the battery state after charging. Abnormal - enter the repair stage; Normal - turn to the next stage.|
|Stage 6 - Battery Recondition||Restore over-discharged batteries. After repair, return to the "Bulk" stage. If it fails, an error will be reported.|
|Stage 7 - Float Charging||Keep battery at 100% without overcharging or damages; Leave smart charger 24/7 plugged without worry.|
|Stage 8 - Pulse Maintenance||Auto-wake up and pulse compensate to 100% full again when the voltage drops, with battery more durable.|
A Must For Drained Batteries
Am - "Ampere"
Peak - "To be top brand in "Automotive" industry"
With 26 years of experience in the automotive business and a perfect supply chain system, Ampeak has been dedicated to providing the most specialized and sophisticated automotive electronic products, and focusing on the development of high-quality products.
Ampeak always gives priority to customers. Based on consumers' demand and feedback, we design smarter, faster charging, higher-efficient, safer battery charger.
Newest Eight-In-One Charger/Maintainer For Multiple Uses
- 84% more power and low-voltage detection down to 1-volt.
- Fully-automatic and manual options, pre-set memory - more convenient and effective.
- Upgraded HD LCD display for monitoring the data & states and do troubleshoot in time.
- Full-wrapped clips with 1.38-inch/35mm openings and firmer cover for side-posts connection.
It adopts high voltage up to 15.8V to stimulation battery, mainly for the bad battery caused by short circuit or low-softening plate.
The working cycle is 5 cycles, each cycle is 4 hours. If the charger test concludes that the battery (using the object) is still less than 12V after the repair cycle, the dead battery is determined.
- Rated input voltage: 120V AC/60Hz
- Rated input current: 9A
- Rated output voltage: 12V DC
- Output current: 2A/10A/25A/AUTO
- Working temperature: 14°F (-10°C) - 104°F (40°C)
- For 12V battery, not applied for 24V battery.
- Do not charge a frozen or totally dead battery.
- Do not smoke or allow a spark or flame near the battery or engine.
- Do not attempt to fix the unit by disassembling or modification.
- The recondition function doesn't apply for a frozen or dead battery!
What’s in the Box:
- 1 Ampeak Smart Battery Charger
- 1 DC Output Cable with Fully-wrapped Clips
- 1 User Manual
Low Voltage Detection Down To 1-Volt
Upgraded Design For Side-posts Connection
Fully-automatic And Manual Options
Fully-Wrapped Pure Copper Battery Clips
Automatic Temperature-compensated Charging
Up to 84% More Power (Industry Average: 75%)
|Applied Battery Type||All 12v lead-acid batteries including STD/AGM/GEL/DEEP CYCLE/WET/ATV/SLA/VRLA.|
|Applicable Model||Car, Motorcycle, Marine, Truck, RV, SUV, Boat, Lawn Mower, Camper, Golf Cart, and so on.|
|Warm Prompt||Do not charge any frozen or totally dead batteries. Not for any single 6v, 24v, or 48v lead-acid batteries.|
|After-sales Service||A 30-day hassle-free return / An 18-month replacement (No man-made damage) !|